UPS uninterruptible power supply is a high sensitive electronic products, and not that equipment you buy expensive, equipment function will not produce fault. However, Santak UPS do small fault is inevitable for precision electronic products occurred. According to statistics UPS failure causes, human factors to account for more than half, the following is a professional and technical personnel to the power of Santak to say that the most likely to occur in the daily operation of several problems.
1, this is the most common a, due to the user or maintenance personnel to the equipment of misunderstanding, although not at fault, but in accordance with the procedure of the failure go, and report to the leadership and called for manufacturers; in fact, this method is one of the most easily overlooked a cause of UPS did not produce what fault.
2, a lot of users in the purchase of the use of UPS uninterrupted power supply to its work principle and other knowledge of the lack of insight, understanding is not too much and lack of practical experience and lead to failure (not in accordance with the standard process of operation);
3, there is a sense of the operation, such as a user calls to say that there is a fault. The engineer turned off the inverter to close the bypass switch, causing the machine to damage;
4, did not accept professional maintenance training, such as repair screwdriver slip, with a damp cloth to wipe the battery caused by fault; in fact, in the appendix that accompanies the product have ups power supply specification can be a detailed view of the problems can be avoided.
5, uninterrupted power supply requirements on the environment is also very high, for example Henan has a cement plant, they will be ups on the plant, dust very much even wrapped a circuit board, resulting in the ups fault occurs, if too much dust environment we can for the ups in dust separation;
6, each manufacturer in the design of UPS power supply will have a little bit of small changes or changes in the functional location and not all ups have to solve the same problem maintenance methods are the same, cannot be a manufacturer UPS experience used in another UPS products;
7, this is the most important one, in the daily work of UPS power failure warning, but due to the negligence of the attendant and not timely detection and treatment, which led to the subsequent failure;
Above a few is that we are most likely to cause Santak UPS is the cause of the failure of the power supply, but also can be avoided. We suggest use should be ranked person for the periodic check, and make a record of the shift, to operate the equipment according to the operation process.